Q345 3mm thickness tubular Galvanized Steel Pole for electrical line
Scope of Application:
The product is mainly use in small power transmission line, which suitable for Small whole, ceiling-mounted steel pole tower installation transmission line project; Generally it only applies to erect on the flat terrain such as plain and side of the road, and much rely on heavy lifting machines for installation.
Straight pole is mainly use to the “straight” part of the power line, it usually only bear with the weight of the wire, the endured wire icing and wind pressure.
Tension pole is mainly use in Load-bearing towers; it would be set between few Straight towers. Since the power line discounted and tower collapsed, it would limit the fault segment between the two Tension towers in the case of tension imbalance on both sides, which ease of construction, maintenance.
Angle pole is mainly installed in the around corner of the power line, so the structure of it has to consider the requirement of undertake imbalance tension; According to the angle degree and strength of tower design, straight line angle tower is mainly use in the small degree corner of the power line, and Tension Angle Tower is mainly used for larger degree corner of the power line.
Terminal pole is mainly use in the beginning or end of the power transmission line, it usually set as the first tower of extension line of substation; because it could undertake great imbalance tension, so sometime it also use in the large degree of power line corner.
Specification
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement. |
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
| Joint of Poles | Slip joint, flanged connected |
| Standard | ISO 9001:2008 , CE |
| Length of per section | Within 15 meter once forming |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Thickness | 1 mm to 40mm |
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
| Packages | Packing with plastic bubble paper and blanket or according to client’s request. |
Terms & Conditions
1. Price Term: EXW, FOB, CFR or CIF Shanghai Port
2. MOQ: 1 sets.
3. Payment: 30% by T/T as deposit and balance by T/T or L/C at sight before shipment. Other payment way is negotiable.
4. Package: plastic bubble paper and blanket or according to client’s requirement.
5. Delivery: for 30 sets, goods can be ready for shipment within 20 workdays after receiving deposit.
6. Parts Design Service Period: 20 years.
Product Tags:
|
|
High Earthquake Resistance Q345 Galvanized Tubular Steel Pole For Electrical Line AWS D 1.1 Images
|
